TECHNO TC LASTIC

Synthetic rubber-based elasticizing and tackifying latex for cement-based mortars and adhesives.

MAIN FEATURES

High bonding performance

High elasticity

APPEARANCE

White liquid

FIELDS OF USE

Flexible adhesive

Pour Adhesive powder into the latex. The mixture must be stirred until it becomes creamy. This product is recommended for laying stable natural stone not affected by humidity or ceramic materials in the following cases:

• medium and large tile sizes on facades or places exposed to considerable temperature variations
• on old tiles outdoors
• on heating floors
• on RASOLASTIK-PLUS and RASOGUM +
• on plasterboard. Use of PRIMER-T PLUS before fixing is not essential but recommended.

Adhesive for vitreous glass mosaic on net backing, installed in swimming pools.

Dilute TC-LASTIC with water in a 1:1 ratio. Blend TECHNOMOS into the obtained mixture. The resulting product provides an extremely tenacious bond and is highly flexible while maintaining the creamy consistency obtained when only water is used for mixing.

Flexible levelling coat

Blend RASO with TC-LASTIC by pouring the powder into the latex. The mixture must be stirred until the paste is creamy and lump-free. Recommended for use on surfaces exposed to considerable temperature variations or on cracked concrete.

In this latter case, it is advisable to bury the fibreglass net into the first layer. As compared to levelling pastes mixed with water, this product possesses high bonding powers even on difficult substrates and is also highly elastic.

The surface must be levelled with two coats, and the second applied 24 hours after the first and in layers up to 3 mm thick.

Finish the surface with a sponge trowel or flat trowel.

Products mixed with TC-LASTIC can be applied straight onto:

Cement-based plaster, cement-lime mortar, cement-based screeds, concrete, and old ceramic floors.