Skip to content
Free Shipping across NZ, Australia & Pacific for orders above $200 | BRANZ-Appraised Waterproofing & Tiling Systems – Technokolla, Fila Solutions & NAC | Free Shipping across NZ, Australia & Pacific for orders above $200
Free Shipping across NZ, Australia & Pacific for orders above $200 | BRANZ-Appraised Waterproofing & Tiling Systems – Technokolla, Fila Solutions & NAC | Free Shipping across NZ, Australia & Pacific for orders above $200

Technokolla Adhesives

 

Technokolla tile adhesives for NZ projects. C2/C2TE/S1/S2 options for porcelain, ceramic, stone and mosaics, including standard-set, rapid-set and non-sag gel formulations for walls, floors and large-format.

Conforms to AS ISO 13007 / EN 12004 and aligned to TANZ and IWAM where relevant to NZBC E3/AS2 systems. PS3- and QA-ready with TDS/SDS support, available on Masterspec for clear specification and detailing.

Frequently Asked Questions

Lorem ipsum dolor sit amet consectetur. Cras feugiat commodo massa sed sagittis leo. Metus eleifend mauris urna lobortis congue. Arcu purus accumsan non duis pharetra mi vestibulum.

Match class to risk and size: C2TE S1 for most porcelain and large-format; C2F for fast turnaround; S2 for high movement; R2/epoxy for special service. Always confirm with TDS.

Concrete, rigid screeds/renders, fibre-cement, plasterboard and approved membranes/primers per TDS. Substrates must be sound, dry within limits, and finished to TANZ flatness.

Use C2TE S1 or gel formulations with correct notch and back-buttering. Verify coverage by lifting tiles. Maintain planeness ≤3 mm/2 m and ≤1 mm/300 mm.

For light/green marbles or translucent stone, use white, low-moisture systems or R2 where required. Trial a control sample and follow stone supplier advice.

Select adhesives rated for exterior/immersion and S1/S2 as required. Observe cure windows before exposure or flood testing. For UFH/heated screeds, allow full cure then staged heat-up.