Technokolla Grout

Cement grout, Techno Colours, is easy to apply and suits most residential and light commercial work. Epoxy grout, Techno Evolution, delivers higher chemical and stain resistance, low porosity and superior durability for demanding environments.

Both systems perform in wet areas when installed correctly. Use Techno Colours for typical residential showers and splash zones. Choose Techno Evolution where maximum stain resistance, hygiene and frequent cleaning are expected. Always include movement joints and seal changes of plane with Techno Acesil.

Yes, both systems can be used with heated floors when installed to the system guidance. Follow controlled heat-up and cool-down cycles and include movement joints as designed. Heated floors are a higher-risk item, escalate to the Surtec Technical Team for confirmation on your project.

Yes, grout is not a substitute for movement joints. Use Techno Acesil at all changes of plane and perimeters, and follow the designer’s joint spacing and width.

Allow full cure, then clean with pH-neutral cleaners for routine care. Avoid harsh acids or solvent products unless the grout type and the cleaner are confirmed as compatible. Rinse well and keep ventilation high in wet areas to minimise mould growth.