Skip to content
Spend $200 or More And Receive A FREE Fila Nopaint Star 1ltrs (Anti- Graffiti) | Free Shipping across NZ, Australia & Pacific for orders above $200 | BRANZ-Appraised Waterproofing & Tiling Systems – Technokolla, Fila Solutions & NAC | Spend $200 or more and receive a FREE Fila Nopaint Star 1ltrs (Anti- Graffiti)
Spend $200 or More And Receive A FREE Fila Nopaint Star 1ltrs (Anti- Graffiti) | Free Shipping across NZ, Australia & Pacific for orders above $200 | BRANZ-Appraised Waterproofing & Tiling Systems – Technokolla, Fila Solutions & NAC | Spend $200 or more and receive a FREE Fila Nopaint Star 1ltrs (Anti- Graffiti)

Fila Pre-Sealer

 

Fila PW10 5-sided presealer is a water-based, VOC-free pre-laying treatment for natural stone, porcelain, terracotta and other absorbent materials. Applied to the back and four edges before installation, it blocks contaminants such as salts, tannins and oxides from rising to the surface, helping prevent efflorescence, streaks and stains. It remains breathable, does not form a surface film, and does not substantially alter adhesion when used as directed. Always test first, ventilate well and follow the label.

Frequently Asked Questions

Lorem ipsum dolor sit amet consectetur. Cras feugiat commodo massa sed sagittis leo. Metus eleifend mauris urna lobortis congue. Arcu purus accumsan non duis pharetra mi vestibulum.

Treating the back and all four edges before the tiles or slabs are laid, to help stop moisture and contaminants migrating through the stone and showing as stains on the face.

Natural stone including marble and granite, agglomerates, terracotta and other absorbent materials. Always check suitability for your specific stone and perform a small test area.

According to the technical data, PW10 does not substantially alter adhesion characteristics when used correctly. Select a suitable adhesive and allow the treated pieces to dry before fixing.

PW10 is ready to use. Apply evenly to the back and edges with a brush, roller or sprayer. Let the material dry fully, then install. Typical waiting time is about 12 to 24 hours depending on temperature.

Yes, if the project calls for surface protection or an enhancing finish. After the initial clean, complete the treatment with the most suitable protector for the top surface, as per the label.