Skip to content
Free Shipping across NZ, Australia & Pacific for orders above $200 | BRANZ-Appraised Waterproofing & Tiling Systems – Technokolla, Fila Solutions & NAC | Free Shipping across NZ, Australia & Pacific for orders above $200
Free Shipping across NZ, Australia & Pacific for orders above $200 | BRANZ-Appraised Waterproofing & Tiling Systems – Technokolla, Fila Solutions & NAC | Free Shipping across NZ, Australia & Pacific for orders above $200

Fila Solvent-based Sealer

Protect and enhance stone and tile with the Fila Solvent-based Sealer collection. These penetrating sealers are typically chosen for dense, low porosity materials, delivering durable resistance to water and oil-based staining while preserving the natural look or, where specified, providing an enhancing effect. Suitable for interior and exterior areas when the label allows, they penetrate quickly, help simplify cleaning, and are commonly used on polished porcelain, granite, marble, terrazzo, terracotta and concrete. Always test first, ensure excellent ventilation during application, and follow the product label.

Frequently Asked Questions

Lorem ipsum dolor sit amet consectetur. Cras feugiat commodo massa sed sagittis leo. Metus eleifend mauris urna lobortis congue. Arcu purus accumsan non duis pharetra mi vestibulum.

Dense and low porosity materials such as polished porcelain, granite, marble and terrazzo, along with terracotta and concrete. Always check the specific product label and do a small test area.

Choose a natural look sealer to keep the original appearance, or an enhancing sealer if you want to deepen tone. Always do a test patch to confirm the final look.

Many solvent-based sealers are suitable for both, refer to the label for area of use. Indoors, provide strong ventilation and protect adjacent finishes. Outdoors, avoid application in direct sun or when rain is expected.

Clean and dry the surface thoroughly. Apply a thin, even coat, allow penetration, then remove all excess before it dries to avoid residue. Very absorbent materials may need a second coat. Observe the labelled dry and cure times before service.

Use a neutral cleaner for routine care. Reapply when water stops beading or when stains become easier to absorb. Frequency depends on traffic, exposure and cleaning practices.