Quick-setting powder adhesive is used in layers up to 10 mm thick. Especially suitable for fixing all kinds of small and medium sizes porcelain tiles. Fixing on facades, heating screeds and in swimming pools.
MAIN FEATURES
- Quick-setting
- No vertical creep
- Easy to apply, creamy consistency
- Frost proof
- Layers up to 10 mm thick
APPEARANCE
White Powder
STORAGE
The product must be stored in undamaged original sealed packaging, in dry cooled conditions, with temperatures between +5°C and +35°C. Please refer to the packaging.
FIELDS OF USE
- Outdoor, indoor, wall and floor installation of small and medium-sized ceramic tiles (single-fired, double-fired, porcelain stoneware, klinker and terracotta).
- Suitable for use when high performance is required within a short time, such as tile laying in industrial environments, swimming pools or facades.
- Suitable for installation on facades, balconies, and swimming pools.
- Over-tiling on top of old ceramic tile.
- Suitable for laying mosaic tiles (ceramic and glass).
- Fixing natural stone and marble, so long as they are not affected by water.
- Fixing on electric or water heating screeds.
SUBSTRATES
Cement-based plaster, cement-lime mortar, gypsum-based plaster¹, anhydrite screeds¹, cement-based screeds, concrete, aerated concrete, old ceramic floors², well-bonded resilient coatings (except polyolefin)², plasterboard¹, RASOGUM + or products of RASOLASTIK range.
¹ after application of PRIMER-T PLUS
² after application of PRIMER-101 PLUS
