FILA PS87 PRO

• Designed to cut through greasy marks, ground-in dirt, and stubborn stains that normal detergents will not shift.
  
• Works as a wax remover, stripping old treatments off tile and stone so surfaces can be resealed or restored.
  
• Safe for use on acid-sensitive surfaces, which are easily damaged by harsh chemical cleaners.
  
• Can be applied diluted for everyday cleaning or undiluted for targeted stain and wax removal.
  
• Leaves no strong chemical smell behind and rinses off with clean water, making it suitable for indoor use.

This cleaner is made for tough jobs across a range of flooring and hard surfaces. It performs well on porcelain tiles, both polished and unpolished, and on ceramic or glazed tiles where grease or dirt collects easily. It is equally suited to terracotta and quarry tiles, which are often coated with wax that needs stripping before resealing. Cement and concrete floors respond well to a diluted mix, especially when preparing them before applying a sealer. It can also be used on unpolished natural stone and agglomerates, with a patch test advised for more delicate finishes. Linoleum and PVC can be cleaned with it too, though always test a small area before doing a full wash.

Tradies and homeowners use FILA PS87 Pro for a wide mix of tasks. In kitchens it is often the go-to product for lifting greasy stains that collect under cooktops or in high-traffic areas. Outdoors it is used to restore patios, entranceways, or tiled steps after a wet winter when dirt and moss stains tend to take hold. Renovation projects use it to strip wax from old floors before resealing, or to clean up stone and concrete surfaces before applying a protective treatment. On construction sites, it is often chosen for cleaning residues from polished porcelain without leaving scratches behind.

Coverage varies depending on dilution and the type of surface being treated:

• Terracotta (1:5 dilution) – typically 10 to 20m² per litre.
  
• Porcelain (1:5 dilution) – up to 40m² per litre.
  
• Natural stone (1:5 to 1:10 dilution) – usually 20 to 35m² per litre.

• Avoid using on polished or new marble, as well as on wood.
  
• Do not apply on methacrylate or acrylic bathtubs, as the surface may be affected.
  
• Always patch test on linoleum or PVC before a full clean.
  
• If unsure about dilution rates on delicate surfaces, contact Surtec or the Technokolla team for advice before starting work.

Appearance

Supplied as a clear liquid detergent in a 1L bottle, with dilution instructions printed on the label for quick reference on site.

Pro Tip

For heavy wax build-up or deep grease stains, apply FILA PS87 Pro undiluted and let it sit for a short while before scrubbing. Allowing the cleaner to work into the surface first makes rinsing easier and often saves a second application.