MAIN DATA
Highly deformable monocomponent powder adhesive used in layers up to 10 mm thick. It is especially suitable for fixing all kinds of porcelain tiles with no size limits and natural stone in large sizes. Fixing on façades, heating screeds, swimming pools and industrial floors.
MAIN FEATURES
- Highly deformable
- Lightened
- High resistance to vertical slipping (microfiber technology)
- Extended open time
- High tensile strength
- Relieve stress, act as a decoupling layer
- Reinforced with microfibers
APPEARANCE
White powder
STORAGE
The product must be stored in undamaged original sealed packaging, in dry cooled conditions, with temperatures between + 5 °C and + 30 °C. Please refer to the packaging.
FIELDS OF USE
- Outdoor, indoor, wall, and floor installation of ceramic tiles (single-fired, double-fired, porcelain stoneware, Klinker, and terracotta) with no size limits.
- Suitable for use when high performance is required, such as installation in non-driveway industrial environments, in swimming pools, or on facades.
- Over-tiling on top of old ceramic tiles without the use of a primer.
- Suitable for laying thin-thickness porcelain stoneware slabs.
- Suitable for laying mosaic tiles (ceramic and glass).
- Fixing natural stone and marble, so long as they are not affected by water.
- Fixing on electric or water heating screeds.
SUBSTRATES
Cement-based plaster, cement-lime mortar, gypsum-based plaster¹, anhydrite screeds¹, cement-based screeds, concrete, aerated concrete, old ceramic floors, resilient floors perfectly adherent (excluding polyolefin coatings)², plasterboard¹, RASOGUM + or products of RASOLASTIK range.
¹ After application of PRIMER-T PLUS
² after application of PRIMER-101 PLUS
