Adesiv MS Gold Flex 12kg

HIGH-PERFORMANCE MONOCOMPONENT MS ADHESIVE 

Monocomponent silane adhesive specifically for gluing all types of wooden floors on cement-based sub-floors or on pre-existing non-absorbent floors (marble, tiles, flagstones, wood surfaces). 

• Monocomponent
• 100% MS Technology
• High yield
• High initial tack
• Suitable for gluing all types of wood flooring
• Free from isocyanate and amines
• Solvent-free
• Low VOC emissions

WHERE IT CAN BE APPLIED: 

• Absorbent and non-absorbent flooring
• Traditional cement screeds
• Anhydride screeds
• Calcium sulfate screeds
• Absorbent and non-absorbent subfloors with underfloor heating or cooling systems

The following can be glued to these surfaces: 

• 10 mm non-locking solid wood elements as per the DIN EN 13227 standard
• mosaic parquet as per the DIN EN 13488 standard
• (Industrial)solid wood strips as per the DIN EN 14761 standard
• M/F interlocking solid oak wood boards with a max. width 18 cm or 20 cm as per the DIN EN 13226 standard
• multi-layer pre-finished floors as per the DIN EN 13489 standard
• cork flooring as per the DIN EN 12104 standard 

*If applied smoothly and evenly (forming a continuous layer), MS GOLD FLEX can act as a vapour seal barrier exclusively for the type of tongue-and-groove parquet floors indicated and on non-heated laying surfaces with residual humidity of up to 4%, corresponding to 85% air humidity.