Brass Techno Trim 2.5mtr (Anti-oxidised)

• Tough Brass Build: Made from solid brass, not plated alloy. Takes the knocks and keeps its shape, even when tiles cop a few boots on site.
• Anti-oxidised Finish: The coating stops tarnish and colour fade, handy for steamy bathrooms or salty coastal homes where cheaper trims dull out quick.
• Brushed Matte Look: Gives a smart, subtle edge that suits everything from pale stone tiles to dark porcelain. Looks flash but not shouty.
• Cuts Easy, Installs Fast: Trim to length with a fine-tooth hacksaw or cutter, seat it in adhesive, and you’re away. Keeps installs simple when time’s tight.
• Sizes for Any Tile Depth: Available in 8 mm, 10 mm, 11 mm, 12.5 mm, 15 mm, 18.5 mm, and 22.5 mm. Covers thin wall tiles through to chunky floor edges.
• Good for Floors and Walls: One trim for both setups. Use it for tile-to-tile transitions, steps, splashbacks, or wall corners without swapping materials.

• Bathrooms and Kitchens: Tidy up tile edges around benchtops, splashbacks, or shower niches where you want a clean brass line.
• Floor Transitions: Works well where tiles meet carpet or wood flooring. Gives a hard edge that won’t chip or lift.
• Feature Walls and Steps: Adds a touch of class around raised tiles or stair treads while keeping those edges protected.
• Coastal and Damp Areas: The anti-oxidised layer helps it last where moisture hangs around. Good for homes in places like Tauranga or Whangārei.
• Renovation Jobs: Spot-on for bringing older bathrooms or kitchens up to scratch without using plastic trims that crack or fade.

Measure and Cut: Check your tile thickness and pick the right trim size. Mark, cut, and file edges smooth.

Set It In: Bed the trim into your tile adhesive before laying tiles, pressing it firm so the edge sits level.

Check Alignment: Keep the visible edge straight with the tile face — no one wants a wavy line once it’s grouted.

Grout and Clean: After the tiles are set, fill the joint with grout and wipe the brass clean before it dries hard.

Final Touch: Give the surface a quick polish with a soft cloth once done. Brings the brushed finish back to life.

• Ceramic, porcelain, or stone tiles
  
• Mosaic sheets
  
• Cement or screed floors
  
• Timber or plywood subfloors (prepped)
  
• Indoor wall or floor surfaces

Brushed matte brass finish with a warm tone and fine texture that sits flush with most tiles. Looks clean, feels solid, and ages nicely without heavy polishing.

Pro Tip

Before you grout, tape the trim edge with painter’s tape. Saves heaps of time later when cleaning off grout haze and keeps the brass shine clean as a whistle.

Not sure which size trim to grab? Flick the Surtec crew a call or message. We’ll help you match the right depth and finish for your tiles and job setup.