FILA PROSTRIP

Professional, ready-to-use remover for paint, graffiti, sealers and stubborn coatings on stone, tiles, concrete and terracotta.

$133.09 - $133.09

$133.09 incl. GST

$133.09 - $133.09

$133.09 incl. GST

Overview

FILA PROSTRIP is a professional-strength, ready-to-use remover designed to strip paint, graffiti, sealers and stubborn surface coatings. Its formula is particularly effective on rough and porous materials, including natural stone, concrete, brick and terracotta. Suitable for both interior and exterior applications, PROSTRIP helps remove unwanted treatments and restore surfaces without the need for dilution.

Quantity

Tradie rates?

What's It For

Removes paint and graffiti from treated and untreated surfaces.
Strips stone sealers and unwanted surface coatings.
Helps remove urethane coatings, synthetic finishes and adhesive residues.
Particularly effective on porous surfaces such as concrete, brick and natural stone.
Removes old paint layers and film-forming coatings from terracotta.
Suitable for restoring surfaces affected by incorrectly applied topical sealers.

Advantages

Professional-strength stripping performance.
Ready to use – no dilution required.
Non-corrosive formula.
Contains biodegradable ingredients.
Easy application using a flat brush or airless sprayer.
Suitable for a wide range of masonry, stone and tiled surfaces.
Effective for both wall and floor applications.

Ideal For

Natural stone
Marble and granite
Porcelain tiles
Ceramic tiles
Concrete
Brick and masonry
Terracotta
Quarry tiles
Quartz surfaces

How to Use

Apply FILA PROSTRIP undiluted directly onto the surface using a flat brush or airless sprayer.
Allow the product to act for at least 5 minutes.
Scrub the treated area with an abrasive pad or suitable cleaning brush.
Rinse thoroughly with clean water.
For vertical surfaces, use a pressure washer where appropriate. For floors, a floor cleaning machine may be used.
Repeat the process if stubborn coatings or residues remain.

For incorrectly applied topical sealers such as WET ECO, allow approximately 15 minutes before scrubbing and rinsing.

Always test on a small, inconspicuous area before full application.

Coverage & Specs

Product type: Heavy Duty Sealer, Coating & Paint Remover
Application: Ready to use – no dilution required
Coverage: Approximately 5m² per litre
Suitable surfaces: Natural stone, porcelain, ceramic, concrete, terracotta and quarry tiles
Application temperature: 5°C to 30°C
Storage temperature: 5°C to 30°C

Coverage is indicative and will vary depending on surface porosity, coating thickness and application conditions.

Downloads

Data Sheet Safety Sheet
point_of_sale Need a product calculation?

Removes paint and graffiti from treated and untreated surfaces.
Strips stone sealers and unwanted surface coatings.
Helps remove urethane coatings, synthetic finishes and adhesive residues.
Particularly effective on porous surfaces such as concrete, brick and natural stone.
Removes old paint layers and film-forming coatings from terracotta.
Suitable for restoring surfaces affected by incorrectly applied topical sealers.

Professional-strength stripping performance.
Ready to use – no dilution required.
Non-corrosive formula.
Contains biodegradable ingredients.
Easy application using a flat brush or airless sprayer.
Suitable for a wide range of masonry, stone and tiled surfaces.
Effective for both wall and floor applications.

Natural stone
Marble and granite
Porcelain tiles
Ceramic tiles
Concrete
Brick and masonry
Terracotta
Quarry tiles
Quartz surfaces

Apply FILA PROSTRIP undiluted directly onto the surface using a flat brush or airless sprayer.
Allow the product to act for at least 5 minutes.
Scrub the treated area with an abrasive pad or suitable cleaning brush.
Rinse thoroughly with clean water.
For vertical surfaces, use a pressure washer where appropriate. For floors, a floor cleaning machine may be used.
Repeat the process if stubborn coatings or residues remain.

For incorrectly applied topical sealers such as WET ECO, allow approximately 15 minutes before scrubbing and rinsing.

Always test on a small, inconspicuous area before full application.

Product type: Heavy Duty Sealer, Coating & Paint Remover
Application: Ready to use – no dilution required
Coverage: Approximately 5m² per litre
Suitable surfaces: Natural stone, porcelain, ceramic, concrete, terracotta and quarry tiles
Application temperature: 5°C to 30°C
Storage temperature: 5°C to 30°C

Coverage is indicative and will vary depending on surface porosity, coating thickness and application conditions.

Downloads

Data Sheet Safety Sheet
point_of_sale Need a product calculation?

Frequently Asked Questions

Does FILA PROSTRIP need to be diluted?
No. FILA PROSTRIP is ready to use and should be applied undiluted.

Can PROSTRIP remove graffiti?
Yes. PROSTRIP removes paint and graffiti from treated and untreated surfaces, including porous concrete, brick and natural stone.

How long should PROSTRIP be left on the surface?
Allow at least 5 minutes before scrubbing and rinsing. For certain topical sealer residues, such as incorrectly applied WET ECO, allow approximately 15 minutes.

How much area will 1 litre cover?
Approximately 5m² per litre, depending on surface porosity, coating thickness and application conditions.

Can PROSTRIP be used on natural stone?
Yes. It is suitable for a wide range of natural stone surfaces. Always test a small, inconspicuous area first.

Shipping and Return Policy

At Surtec, we aim to make your experience as seamless as possible. Orders are processed efficiently through our Auckland branches and distributed nationwide via our growing logistics network. For any queries about delivery times, product availability, or returning an item, feel free to get in touch with our team. We're here to help you keep your projects moving.