Description
Heavy-Duty Tile Cleaner, Degreaser & Wax Remover
FILA PS87 PRO is a professional-grade detergent made for deep cleaning and restoration. This 3-in-1 formula works as a floor cleaner, stain remover, and wax stripper, ideal for removing grease, old treatments, and stubborn grime from hard surfaces.
Designed for use on a wide range of materials, including porcelain, ceramic, terracotta, concrete, and unpolished stone, it’s suitable for both domestic and commercial settings. Whether you need to clean newly laid tiles or strip old wax from a tired floor, PS87 PRO gets the job done without damaging delicate surfaces.
Key Benefits
-
Removes tough grease, dirt, and surface stains
-
Excellent for stripping wax from tiles and stone
-
Doesn’t damage acid-sensitive surfaces
-
Can be used diluted or undiluted depending on the job
-
No strong odour; easy to rinse off
Where to Use It
-
Porcelain Tiles (including polished and unpolished)
-
Ceramic and Glazed Tiles
-
Terracotta and Quarry Tiles
-
Cement and Concrete Surfaces
-
Natural Stone and Agglomerates (unpolished)
-
Linoleum and PVC (test small area first)
Typical Applications
-
Removing greasy stains from kitchen floors
-
Deep-cleaning patios and tiled outdoor areas
-
Stripping waxes from old floor treatments
-
Preparing new stone or concrete before sealing
-
Cleaning construction residues from polished porcelain
Coverage
Coverage depends on dilution and surface type:
-
Terracotta (1:5) – 10 to 20m² per litre
-
Porcelain (1:5) – up to 40m² per litre
-
Natural Stone (1:5 to 1:10) – 20 to 35m² per litre
Application Notes
-
Do not use on polished marble, new marble, or wood
-
Avoid using on methacrylate or acrylic bathtubs
-
For linoleum or PVC, always perform a patch test
-
Contact Surtec or the Technokolla team for dilution advice on delicate or polished surfaces
FAQs
1. What surfaces can I use FILA PS87 PRO on?
It’s ideal for porcelain, ceramic, terracotta, concrete, and natural stone (unpolished). It also works on quarry tiles, agglomerates, linoleum, and PVC, though sensitive surfaces should be tested first.
2. Can it be used undiluted?
Yes. For heavily soiled or waxed surfaces, FILA PS87 PRO can be applied undiluted. For general cleaning, it should be diluted based on the surface and type of dirt.
3. Does the FILA PS87 PRO remove old wax coatings?
Yes. FILA PS87 PRO removes water-based, re-polishable, and metallic waxes from tiled and stone surfaces.
4. Is it safe on acid-sensitive stone?
Yes. It’s formulated to clean natural stones without causing damage, unlike acid-based cleaners.
5. How do I know the right dilution ratio for the FILA PS87 PRO?
Refer to the surface material:
-
Light cleaning: 1:10
-
Moderate to heavy dirt: 1:5
-
Heavy wax removal: Use undiluted
When unsure, get in touch with Surtec for tailored advice.
